Universiti Teknikal Malaysia Melaka
Faculty of Mechanical Technology and Engineering (FTKM)
FTKM is one of the seven faculties established in UTeM. The main focus is to train students to become competent engineers fulfilling the much-needed engineering professionals especially for the industrial sector in Malaysia, balancing academic and technical-based training for future-ready postgraduates.
Full-time: 1.5–2.5 years
Part-time: 2–4 years
Programmes Offered
Master of Mechanical Engineering
Energy Engineering (MMCE) - MQA/FA1498
Automotive Engineering (MMCV) - MQA/FA1499
Product Design (MMCD) - MQA/FA1500
Master of Mechanical Engineering (MMCM) - MQA/FA10825
Admission Requirements
1
A recognised Bachelor's Degree in Engineering / Engineering Technology with minimum CGPA of 2.75 or its equivalent.
2
CGPA between 2.50–2.75 may be accepted subject to rigorous internal assessment.
3
CGPA below 2.50 with minimum 5 years of relevant work experience may be considered, subject to rigorous internal assessment.
4
Bachelor's Degree in Science / Technology (not related to Engineering / Engineering Technology) must undergo appropriate prerequisite courses determined by UTeM and meet the minimum CGPA based on (i) to (iii).
Language Requirements (International Applicants)
TOEFL
520
TOEFL iBT
3
IELTS
5.0
MUET
3
Applicants who do not meet these requirements must sit a placement test and complete an English programme conducted by UTeM prior to commencing their studies. Students who obtain a lower band must complete remedial English courses in addition to graduation requirements. Exemptions may apply for graduates from English-medium universities or Commonwealth countries. Proof of evidence must be provided to SPS.
Programme Structure
Master of Mechanical Engineering (Energy Engineering)
| Section | Course | Credit |
|---|---|---|
| Compulsory Subjects | Research Methodology | 3 |
| University Elective Subjects (choose one) |
Entrepreneurship | 3 |
| Engineering & Technology Management | ||
| Project Management | ||
| Quality Systems Management | ||
| Faculty Core | Mechanical System Design | 3 |
| Numerical Analysis | 3 | |
| Master Project | 10 | |
| Programme Core | Advanced Heat Transfer | 3 |
| Monitoring & Verification | 3 | |
| Energy Management | 3 | |
| Renewable Energy Technology | 3 | |
| Computational Fluid Dynamics | 3 | |
| Programme Electives (choose one) |
Bio-Fuel Technology | 3 |
| Waste Heat Recovery | ||
| Small Scale Electric Hydro | ||
| Total Credit Hours | 40 | |
Master of Mechanical Engineering (Automotive)
| Section | Course | Credit |
|---|---|---|
| Compulsory Subjects | Research Methodology | 3 |
| University Elective Subjects (choose one) |
Entrepreneurship | 3 |
| Engineering & Technology Management | ||
| Project Management | ||
| Quality Systems Management | ||
| Faculty Core | Mechanical System Design | 3 |
| Numerical Analysis | 3 | |
| Master Project | 10 | |
| Programme Core | Green Technology Vehicle | 3 |
| Vehicle Electrical & Electronics System | 3 | |
| Intelligent Vehicle Control | 3 | |
| Noise, Vibration & Harshness | 3 | |
| Programme Electives (choose two) |
Automotive Human Factor | 3 |
| Emission Control Technology | ||
| Vehicle Power Train and Driveline | 3 | |
| Vehicle Breaking System | ||
| Tyre Behaviour & Performance Control | 3 | |
| Advanced Vehicle Dynamics | ||
| Total Credit Hours | 40 | |
Master of Mechanical Engineering (Product Design)
| Section | Course | Credit |
|---|---|---|
| Compulsory Subjects | Research Methodology | 3 |
| University Elective Subjects (choose one) |
Entrepreneurship | 3 |
| Engineering & Technology Management | ||
| Project Management | ||
| Quality Systems Management | ||
| Faculty Core | Mechanical System Design | 3 |
| Numerical Analysis | 3 | |
| Master Project | 10 | |
| Programme Core | Computer Aided Engineering | 3 |
| Time Compression Technologies | 3 | |
| Fatigue & Fracture Mechanics | 3 | |
| Thermal System Design | 3 | |
| Programme Electives (choose two) |
Industrial & Design Engineering | 3 |
| Human Factors in Design | ||
| Product Reliability & Integrity | 3 | |
| Design for Manufacturing and Assembly | ||
| Total Credit Hours | 40 | |
Master of Mechanical Engineering
| Category | Course | Credit |
|---|---|---|
| Compulsory Subjects | Research Methodology | 3 |
| University Elective | Project Management | 3 |
| Programme Core | Numerical Analysis | 3 |
| Mechanical System Design | 3 | |
| Applied Heat Transfer | 3 | |
| Applied Engineering Statistics | 3 | |
| Advanced Material Engineering | 3 | |
| 3D Modelling | 3 | |
| Structural Dynamic | 3 | |
| Elective (choose one only) |
Computational Fluid Dynamics | 3 |
| Solid Mechanics Computer Modelling | ||
| Intelligent Vehicle Control | ||
| Computer Aided Engineering | ||
| Master Project I | 4 | |
| Master Project II | 6 | |
| Total Credit Hours | 40 | |
Programme Fees
Local
RM 8,710.00
International
RM 22,065.00
Exclusive of 6% SST
Fee Structure — Local Student
| Structure | Sem 1 RM |
Sem 2 RM |
Sem 3 RM |
Sem 4+ RM |
Full Fee RM |
|---|---|---|---|---|---|
| Registration FeeYuran Pendaftaran | 280.00 | - | - | - | |
| Semester FeeYuran Semester | 310.00 | 310.00 | 310.00 | 310.00 | |
| Tuition FeeYuran Pengajian | 4,200.00 | 2,400.00 | 900.00 | - | |
| Program Fee*Yuran Program* | 4,790.00 | 2,710.00 | 1,210.00 | 310.00 | 8,710.00 |
* Applicable to local students. Fees are subject to change without prior notice.
Fee Structure — International Student
| Structure | Sem 1 RM |
Sem 2 RM |
Sem 3 RM |
Sem 4+ RM |
Full Fee RM |
|---|---|---|---|---|---|
| Registration Fee Yuran Pendaftaran |
280.00 | - | - | - | - |
| Semester Fee Yuran Semester |
310.00 | 310.00 | 310.00 | 310.00 | 22,065.00 |
| Tuition Fee Yuran Pengajian |
8,350.50 | 6,879.50 | 5,625.00 | - | |
| Program Fee* Yuran Program* |
8,940.50 | 7,189.50 | 5,935.00 | 310.00 | |
| 6% Sales & Services Tax (SST) | 536.43 | 431.37 | 356.10 | 18.60 | |
| Total Program Fee* 6% SST Inclusive |
9,476.93 | 7,620.87 | 6,291.10 | 328.60 | 23,388.90 |
* Applicable to international students. Fees are subject to change without prior notice.
For Further Information
Faculty of Mechanical Technology and Engineering