MASTER PROGRAMME

As Malaysia aims to become a fully industrialized nation by 2020, Malaysian businesses and corporate sectors have to provide the impetus and drive for this movement forward. Globalization and K-Economy require Malaysian industries to constantly upgrade their knowledge, competency and skills. This will create an ever-expanding demand for technical and managerial skills and talents.

The Centre for Graduate Studies (PPS) of Universiti Teknikal Malaysia Melaka (UTeM) was established to further enhance the contribution of UTeM in the area of engineering, technology and management through rigorous and dedicated academic research.  The research activities at UTeM are geared towards the combination of applied industrial and academic excellence.

Universiti Teknikal Malaysia Melaka (UTeM) Centre for Graduate Studies was strives to provide higher degree education that is of high quality and relevant to the needs of the varied participants of the on the range of programs offered. The ability to respond to participant’s need is facilitated by a program structure, which permits the maximum flexibility consistent with the maintenance of academic requirements and standards and with an emphasis close professional relationships between staff and students within the Centre. It is part of an academic community, which prides itself on an outstanding reputation for teaching and research. The academic staffs, working at the frontier of their subjects, are often in close collaboration with colleagues from the industries and the Government. In the spirit of supportive fraternity, all students, regardless of creed and background, benefit from the challenges and opportunities presented by such environment.

Students tend to identify most strongly with their academic department or individual supervisor. However, all graduate students at UTeM, as well as those involved in teaching and supporting them, are also members of the Centre for Graduate Studies. The Centre supports academic excellence of departments by providing a high-level focus within the University for Graduate Study and the interest of the graduate students; it also organizes research training program and participates in the quality assurance of postgraduate degrees.

We at the Centre for Graduate Studies are committed to providing you with numerous opportunities to develop your skills and knowledge while providing you with a supportive yet challenging environment.

 

MASTER PROGRAMME BY TAUGHT COURSE

MASTER PROGRAMME BY RESEARCH

MASTER OF SCIENCE

The Master of Science candidate is supervised by an academic staff (or a panel of supervisors) from the faculty. The directed research work will focus on a particular subject that introduces candidates to the processes by which new knowledge is developed or/and applied accordingly. The specific topic of investigation will be agreed upon by the supervisor (or panel of supervisors) and the candidate. The academic progress of a candidate is assessed through a research. Progress Report submitted at the end of each semester. The degree is awarded based on an oral examination (viva-voce) of the thesis submitted by the candidate on completion of the study. Candidates intending to study by research may submit their application for admission throughout the year.

Programmes Offered:
  • Electrical Engineering
  • Electronic Engineering
  • Mechatronic Engineering
  • Mechanical Engineering
  • Manufacturing Engineering
  • Information and Communication Technology
  • Technology Management
  • Entrepreneurship
  • Technical Communication
  • Industrial Counseling
  • Human Resource Development

Mode of Registration Full Time Part Time
Duration (years) 1-3 2-5

Programme Structure

Module Subject Credit
Compulsory Subject Research Methodology 3
University Elective Entrepreneurship 3
Subjects Enggineering & Technology Management 3
(Choose One) Project Menagement 3
Quality System Management 3
Thesis 30
Total Credit Hours 36

 

MASTER PROGRAMME BY MIXED MODE

MASTER PROGRAMME BY MIXED MODE

 

At the moment the Master Programme by Mixed Mode is exclusively offered by the Faculty of Electrical Engineering and Faculty of Mechanical Engineering. Mixed Mode refers to the combination of taught course and research activities. The assessment depends upon both the coursework and dissertation (research work). The component for the coursework is 50% and the dissertation contributes the other 50%. The Mixed Mode program develops the research skill of the students on top of enhancing the theoretical knowledge of the subject area.


  • FACULTY OF ELECTRICAL ENGINEERING

     Faculty of Electrical Engineering offers one Mixed Mode programmes:

    • Industrial Power

    Programme Structure

     

     Mode of Registration  Full Time Part Time
     Duration (years) 2-3 -

    Master of Electrical Engineering (Industrial Power)


     1st Semester (Taught Courses) Credit
     Research Methodology 3
     Power Quality & Energy Efficiency 3
     Advanced Control Systems 3
     Power System Modelling 3
     2nd Semester (Taught Courses)  
     Engineering and Technology Management 3
     Power System Protection & Stability 3
     Power System Operation and Control 3
     3rd & 4th Semester (Research)  
     Dissertation
    21
    Total Credit Hours

    42

    For Further Information
     
    Faculty of Electrical Engineering,
    Universiti Teknikal Malaysia Melaka (UTeM),
    Hang Tuah Jaya,
    76100 Durian Tunggal, Melaka, Malaysia.

    Phone:+606-270 2112
    Fax: +606-270 1044
    Email: fke@utem.edu.my
    Website : http://fke.utem.edu.my/en/
  • FACULTY OF MECHANICAL ENGINEERING

     Faculty of Mechanical Engineering offers three Mixed Mode programmes:

    • Applied Mechanics

    • Energy

    • Automotive

    Programme Structure

     

     Mode of Registration  Full Time Part Time
     Duration (years) 2-3 3-5

    Master of Mechanical Engineering (Energy)


     1st Semester (Taught Courses) Credit
     Engineering and Technology Management 3
     Mechanical System Design 3
     Engineering Modeling & Simulation 3
     Energy Management System 3
     2nd Semester (Taught Courses)  
     Research Methodology 3
     Renewable Energy 3
     Energy Technology 3
     3rd & 4th Semester (Research)  
     Dissertation
    21
    Total Credit Hours

    42


    Master of Mechanical Engineering (Applied Mechanics)


     1st Semester (Taught Courses) Credit
     Engineering and Technology Management  3
     Mechanical System Design 3
     Engineering Modeling & Simulation 3
     Advance Material Engineering 3
     2nd Semester (Taught Courses)  
     Research Methodology 3
     Failure Mechanics 3
     Crashworthiness and Impact 3
     3rd & 4th Semester (Research)  
     Dissertation
    21
    Total Credit Hours

    42


    Master of Mechanical Engineering (Automotive)


     1st Semester (Taught Courses) Credit
     Engineering And Technology Managementy 3
     Mechanical System Design 3
     Engineering Modeling & Simulation 3
     Advance Material Engineering 3
     2nd Semester (Taught Courses)  
     Research Methodology 3
     Vehicle Power Train System 3
     Intelligent Vehicle Dynamics Control 3
     3rd & 4th Semester (Research)  
     Dissertation
    21
    Total Credit Hours

    42

     

    For Further Information
     
    Faculty of Mechanical Engineering,
    Universiti Teknikal Malaysia Melaka (UTeM),
    Hang Tuah Jaya,
    76100 Durian Tunggal, Melaka, Malaysia.

    Phone:+606-270 4341
    Fax: +606-270 1046
    Email: fkm@utem.edu.my
    Website : http://fkm.utem.edu.my/

 

Viva-Voce Calendar

 

 What I Need to Do?
 Semester I 2021/2022

 For Postgrade Students:

 Semester ll (2022/2023)

Semester II Lectures / Research (Part Two) 

8 weeks

02/05/2023 - 23/06/2023

Last Day Withdrawal TD of Course

 02/06/2023

 For Research Students:

 
 Semester ll (2022/2023)

Semester II Lectures / Research (Part Two) 

8 weeks

02/05/2023 - 23/06/2023

Last Day Withdrawal TD of Course

 02/06/2023

 

    For Taught Course & Mixed Mode:     

                 
Semester ll (2022/2023)
 

Semester II Lectures / Research (Part One) 

8 weeks

02/05/2023 - 23/06/2023

Last Day Withdrawal TD of Course

 02/06/2023